Volvo

The original pod was made in two parts, the disc and then the urethane gear. We manufacture the replacement pod as one piece. This ensures a stronger part with no failure possible. You will need to count the teeth of your old pod before ordering. Recommended to also order gear listed above.700 Learn More

Individual Gears for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Learn More

Three Odometer Gear Set for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Learn More

If you have a horn that is always on, this kit is what you need to permanently fix the problem. The dealer fix is to replace the steering wheel at a large cost plus having the same inferior parts installed that will fail again. Learn More

If your horn sounds on its own the probable cause is defective horn contacts in the steering wheel, this kit repairs this concern. The dealer fix is to replace the steering wheel at a greater cost plus having the same inferior parts installed that will fail again. Learn More

12 Tooth Small Odometer Pod - Diameter 15.4mm There are 2 gears that operate the odometer. 1. 15 tooth odometer gear 2. 12 tooth small pod gear We always recommend to replace both gears at the same time. Learn More

15 tooth odometer gear. (E15) The diameter of this gear is 6.90mm or .271" This gear rides on a small pod gear There are 2 gears that operate the odometer. 1. Odometer gear -E15 2. Odometer Pod -small 12 teeth We always recommend to replace both gears at the same time. Learn More

Individual Gears for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Learn More

Three Odometer Gear Set for VDO Instrument Clusters only. (Electronic Speedometer) There are multiple tooth count options for the gear E3 on these models. Gear E1- is the drive gear and has always 12 teeth Gear E2- has always 48 teeth on the outside and 12 teeth on the inside. Gear E3- has always 48 teeth on the outside but the inside gear could have between 12 and 19 teeth. You must count the teeth on the old gear (E3) before you place the order. If you cannot count the teeth on E3 anymore, please count the teeth of the next gear that it meshes with. If your tooth count is 39=48x21, 41=48x19, 42=48x18, 43=48x17, 44=48x16, 45=48x15, 46=48x14, 47=48x13, 48=48x12 Learn More